ONE Spray Gun System with Standard PPS™
ONE gun meets all of your spraying needs
Works with 3M™ PPS™ (Legacy) and 3M™ PPS™ Series 2.0, an all-in-one solution for mixing/measuring, filtering and spraying of liquid coating material
Replaceable atomizing heads afford the performance of a brand new gun on demand
Selection of atomizing heads allows for spraying of primer, sealer, base and clear coat
3M™ ACCUSPRAY™ ONE SPRAY GUN SYSTEM WITH STANDARD PPS™ PN16580
The 3M™ Accuspray™ Spray Gun System with Standard PPS™ combines the simplicity and easy maintenance of our Accuspray™ spray guns and with the material-saving, rapid clean-up convenience of PPS™. Replaceable atomizing heads afford the performance of a new gun, on demand and at a fraction of the cost. And the PPS™ disposable cup and liner system reduces solvent needed for cleanup by as much as 70%.
3M™ ACCUSPRAY™ ONE SPRAY GUN KIT PN16578
The 3M™ Accuspray™ ONE Spray Gun Kit Includes:
(1) 3M™ Accuspray™ ONE Spray Gun
(1) Accuspray™ Replaceable Atomizing Head, 1.2 mm
(1) Accuspray™ Replaceable Atomizing Head, 1.3 mm
(1) Accuspray™ Replaceable Atomizing Head, 1.4 mm
(1) Accuspray™ Replaceable Atomizing Head, 1.8 mm
(1) Accuspray™ Replaceable Atomizing Head, 2.0 mm
(1) Air Control Valve
(1) Mountable Spray Gun Hanger
(1) Accuspray™ Atomizing Head Placard
3M™ ACCUSPRAY™ ATOMIZING HEAD, PN16609, RED, 2.0 MM, 4 PER KIT
2.0 mm atomizing heads are typically used with our 3M™ Accuspray™ HGP Spray Gun, built specifically for applying high-volume, high-viscosity fluids. Use these heads for applying gel coats, adhesives, undercoatings, high build primers, specialty and sound dampening coatings.
3M™ ACCUSPRAY™ ATOMIZING HEAD, PN16611, CLEAR, 1.8 MM, 4 PER KIT
1.8 mm replaceable atomizing heads are ideal for med-viscosity to hi-viscosity coatings such as auto primers, lacquers and adhesives.
3M™ ACCUSPRAY™ ATOMIZING HEAD, PN16612, ORANGE, 1.4 MM, 4 PER KIT
1.4 mm atomizing heads deliver fine atomization with minimal overspray, making it ideal for lower-viscosity materials such as automotive sealer, paint, topcoats, lacquers and light adhesives.
3M™ ACCUSPRAY™ ATOMIZING HEADS, PN16614, GREEN, 1.3 MM, 4 PER KIT
With the 1.2 mm and 1.3 mm atomizing heads, you can go from start to finish on bumpers
3M™ ACCUSPRAY™ ATOMIZING HEAD, PN16615, BLUE, 1.2 MM, 4 PER KIT
1.2 and 1.3 mm 3M™ Accuspray™ Atomizing Heads are excellent for low-viscosity coatings and reduced overspray in hot and humid environments. Use them for applying waterborne and solvent basecoat paints in thin clear coats, as well as stains, varnishes, mold release agents, aerospace and marine top coats, and other fluids requiring very fine atomization. These heads contain atomizing air holes in the air caps to achieve the highest possible finish quality.
3M™ PPS™ CUP & COLLAR, PN16115, MINI, 2 PER CARTON
Volume 6 Fluid Ounce
Volume (Metric) 180 ml
3M™ PPS™ LID & LINER KIT, PN16324, LARGE (28 FL OZ), 125 MICRON FILTERS, 25 LIDS & LINERS PER KIT, 1 KIT PER CASE
Volume 28 Fluid Ounce
Volume (Metric) 850 ml
Kits contain disposable lids with micron filters, liners and sealing plugs
3M™ PPS™ CUP & COLLAR, PN16001
Volume 22 Fluid Ounce
Volume (Metric) 650 ml
3M™ PPS™ LID & LINER KIT, PN16114, MINI (6 FL OZ), 200 MICRON FULL DIAMETER FILTER, 50 LIDS & LINERS PER KIT, 1 KIT PER CASE
Volume 6 Fluid Ounce
Volume (Metric) 180 ml
3M™ PPS™ LINER DISPENSER: LARGE, STANDARD, OR MIDI, PN16219
Dispenses supplies for the 3M™ PPS™ (Legacy) paint preparation system
Offers exceptional convenience to access supplies
Keeps supplies clean, neat, organized and free from contamination
Top-loading access for reloading supplies
3M™ PPS™ LID & LINER DISPENSER: MINI & MICRO, PN16298
3M™ PPS™ Lid & Liner Dispenser is a wall-mountable unit that makes supplies such as lids and liners for the 3M™ PPS™ (Legacy) paint preparation system readily available. This storage accessory conveniently dispenses supplies one at a time, while keeping the remaining supply clean and safe from contamination.
3M™ PPS™ LID DISPENSER: LARGE, STANDARD, OR MIDI, PN16299
Dispenser makes it easy to access supplies such as lids and liners to be used with the 3M™ PPS™ (Legacy) paint preparation system. Dispensers will hold at least 50 units of either lids or liners. Workers can easily release just one at a time. These dispensers are wall mountable to keep supplies close at hand and countertops open. Supplies for the 3M™ PPS™ are kept clean, neat, organized and free from contamination in our dispenser. When it is time to restock supplies, the top-loading access feature offers exceptional convenience.